MS ISO 712:1998
Cereals and cereal products - Determination of moisture content (Routine reference method)

MS ISO 7302:1998
Cereals and cereal products - Determination of total fat content

MS ISO 2171 :1998
Cereals, pulses and derived products - Determination of ash

MS 1427: 1998
Cereals, pulses and other food grains - Nomenclature

MS ISO 6647: 1998
Rice - Determination of amylose content

MS ISO 951 :1998
Pulses in bags - Sampling

MS ISO 2170: 1998
Cereals and pulses - Sampling of milled products

MS ISO 950: 1998
Cereals - Sampling (as grain)

MS EN 344: 1998
Requirements and test methods for safety, protective and occupational footwear for professional use

MS EN 345 :1998
Specification for safety footwear for professional use

MS ISO 4661-1 :1998
Rubber, vulcanized or thermoplastic - Preparation of samples and test pieces - Part 1: Physical tests

MS ISO 81 5: 1998
Rubber, vulcanized or thermoplastic Determination of compression set at ambient, elevated or low temperatures

MS ISO 4648:1998
Rubber, vulcanized or thermoplastic Determination of dimensions of test pieces and products for test purposes

MS ISO 3383:1998
Rubber - General directions for achieving elevated or subnormal temperatures for test purposes

MS ISO 37:1998
Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properfies

MS 1428 :1998
Specification for general purpose fuse links for domestic and similar purposes (Primarily for use in plugs)

MS 589: Pt. 3:1998
Specification for 13A plugs, socket-outlets, adaptors and connection units. Part 3: Specification for adaptors (First revision)

MS EN 71-6:1998
Safety of toys - Part 6: Graphical symbol for age warning labelling

MS ISO 9026:1998
Raw rubber or unvulcanized compounds - Determination of green strength

MS 1429: 1998
Specification for medium density fibreboards (MDF)

MS ISO 1099:1998
Metals - Axial load fatigue testing

MS ISO 1143:1998
Metals - Rotating bar bending fatigue testing

MS ISO 1352: 1998
Steel - Torsional stress fatigue testing

MS ISO 6506: 1998
Metallic materials - Hardness test - Brinell test

MS ISO 83: 1998
Steel - Charpy impact test (U-notch)

MS 1430: 1998
Specification for steel library shelving

MS ISO/IEC ISP 11185-12:1998
Information Technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 12: FVT2116 - Generalized teinet synch control object; FVT2117 Generalized teinot signal control object; FVT2118 - Generalized teinet negotiation control object; FVT2119 - Generalized telnet subnegotiation control object

MS ISOAEC ISP 11185-13:1998
Information Technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions: Part 13: FVT2111 - Waiting time control object

MS ISO/IEC ISP 11185-14:1998
Information Technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 14: FVT2112 - Printer control object

MS ISO/IEC ISP 11185-15:1998
Information Technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 15: FVT2113 - Field definition management control object

MS ISO/IEC ISP 11185-16:1998
Information Technology - International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 16: FVT2114 - Terminal signal titles control object

MS ISO/IEC ISP 11185-17: 1998
Information Technology- International standardized profiles FVT2nn - Virtual terminal basic class - Register of control object type definitions - Part 17: FVT2115 - Help text control object

MS 1419: Pt. 4:1998
Specification for acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications: Part 4: Installation of ABS pipe systems

MS ISO/IEC 7811-6:1998
Identification cards - Recording technique - Part : Magnetic stripe- High coercivity

MS ISO/IEC TR 10000-3: 1998
Information technology - Framework and taxonomy of international standardized profiles Part 3: Principles and taxonomy for open system environment profiles

MS ISO/IEC 10164-10: 1998
Information technology - Open systems interconnection - Systems management: Usage metering function for accounting purposes

MS ISO/IEC 101 64-13: 1998
Information technology - Open systems interconnection - Systems management: Summarization function

MS ISO/IEC 10164-15:1998
Information technology - Open systems interconnection - Systems management: Scheduling function

MS ISO/IEC 10164-17: 1998
Information technology- Open systems interconnection - Systems management: Change over function

MS ISO 289-1:1998
Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1 : Determination of Mooney viscosity

MS ISO 289-2:1998
Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2 : Determination of pre-vulcanization characteristics

MS ISOAEC 7811-5: 1998
Identification cards - Recording technique : Part 5 : Location of read-write magnetic track - Track 3

MS ISO/IEC 7813:1998
Identification cards - Financial transaction cards

MS ISO/IEC 8481 :1998
Information technology - Telecommunications and information exchange between systems - DTE to DTE direct connections

MS ISO 844: 1998
Cellular plastics - Compression test for rigid materials

MS ISO 489: 1998
Plastics - Determination of the refractive index of transparent plastics

REVISION

MS 241:1998
Specification for bread (First revision)

MS 84: 1998
Specification and grades for paddy (First revision)

MS 600: 1998
Specification for cordials, squashes and syrups (First revision)

MS 6: 1998
Specification for quick-frozen, raw and cooked shrimps or prawns (Second revision)

MS 1113:1998
Specification for dried crackers (Keropok kering) from freshwater and marine fish, crustacea and molluscan shellfish (First revision)

MS 898:1998
Specification for dry-salted anchovies (ikan bilis) (Second revision)

MS 575: 1998
Specification for jet aviation fuel (First revision)

MS 158:1998 Specification for liquefied petroleum gas (Second revision)

MS 11 7: 1998
Specification for kerosene (Second revision)

MS 122 :1998
Specification for fuel oils for use in engines and burning equipment (Second revision)

MS EN 71-3:1998
Safety of toys - Part 3: Migration of certain elements

MS EN 71-4: 1998
Safety of toys - Part 4: Experimental sets for chemistry and related activities

MS EN 71-5:1998
Safety of toys - Part 5: Chemical toys (sets) other than experimental sets

MS 1392: 1998
Test method for the analysis of extractable proteins in natural rubber products

MS ISO/IEC 7812-1 :1998
Identification cards - Identification of issuers - Part 1: Numbering system (First revision)

MS ISO/IEC 7812-2:1998
Identification cards - Identification of issuers Part 2: Application and registration procedures (First revision)

MS ISO/IEC 7811-1 :1998
Identification cards - Recording technique - Part 1: Embossing (First revision)

MS ISOAEC 7811-2:1998
Identification cards - Recording technique - Part 2: Magnetic stripe (First revision)

MS ISO/IEC 7811-3:1998
Identification - cards - Recording technique - Part 3: Location of embossed characters on ID-1 cards (First revision)

MS ISO/IEC 7811-4:1998
Identification cards - Recording technique - Part 4: Location of read-only magnetic tracks - Tracks 1 and 2 (First revision)

MS 972: 1998
Specification for solid rubber flooring (First revision)

MS ISO/IEC ISP 10607-1:1998
Information technology - International Standardized Profiles AFTnn - File Transfer, Assess and Management - Part 1 : Specification of ACSE, Presentation and Session protocols for the use by FTAM (First revision)

MS ISOAEC ISP 10607-2:1998
Information technology - International Standardized Profiles AFTnn - File Transfer, Assess and Management - Part 2 : Definition of document types, constraint sets and syntaxes (First revision)

MS ISO/IEC ISP 10607-3: 1998
Information technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 3: AFT1 1 - Simple File Transfer Service (unstructured) (First revision)

MS ISO/IEC ISP 10607-4: 1998
Information technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 4 : AFT12 Positional File Transfer Service (flat) (First revision)

MS ISO/IEC ISP 10607-5:1998
Information technology - International Standardized Profiles AFTnn - File Transfer, Assess and Management - Part 5 : AFT22 - Positional File Acess Service (flat) (First revision)

MS 133 : Part B3 :1998
Methods of tests for paints and varnishes : Part 63 : Determination of pigment content (Centrifuge) (First revision)

MS ISO/IEC TR 10000-1 : 1998
Information technology - Framework and taxonomy of international standardized profiles Part 1 : General principles and documentation framework (First revision)

MS ISO/IEC TR 10000-2:1998
Information technology - Framework and taxonomy of international standardized profiles Part 2 : Principles and taxonomy for OSI profiles (First revision)

AMENDMENT
MS 123:1993
Amendment 1:1998 to MS 123:1993 Specification for diesel fuel (Second revision)