|
|
|
|
SINGAPORE
List of ASEAN Standards approved/withdrawn/amended in 1996 |
SS 354 : Specification for printed boards - Part I 1 : 1 996 'Flex-rigid multilayer printed boards with through connections (Endorsement with amendments of IEC 326-11 1991)
SS ISO 188 1982 *Rubber, vulcanized - Accelerated ageing or heat- resistance tests
SS ISO 8630 - I : 1987 'Disk cartridges - Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 1 3 262 ftprad, on 80 tracks on each side - Dimensional, physical and magnetic characteristics
SS ISO 8630 - 2 -. 1987 'Disk cartridges - Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 1 3 262 ftprad, on 80 tracks on each side - Track format A for 77 tracks
SS ISO 8630-3 : 1987 'Disk cartridges - Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 1 3 262 ftprad, on 80 tracks on each side - Track format B for 80 tracks
SS ISO 8860-1 : 1987 'Disk cartridges - Information processing - Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftrad, on 80 tracks on each side - Dimensional, physical and magnetic characteristics
SS ISO 8860-2 : 1987 'Disk cartridges - Information processing - Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftrad, on 80 tracks on each side - Track format
SS ISO/IEC 9529-1 : 1989 'Disk cartridges - Information processing systems - Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modultion recording at 1 5 916 ftprad, on 80 tracks on each side - Dimensional, physical and magnetic characteristics
SS ISO/IEC 9529-2 . 1989 'Disk cartridges - Information processing systems - Data interchange on 90 mm (3-5 in) flexible disk cartridges using modified frequency modulation recording at 1 5 916 ftrad, on 80 tracks on each side - Track format
SS ISO 11530 : 1993 *Hydraulic jacks
SS IEC 326-12 : 1992 Specification for printed boards - Mass lamination panels (semi-manufactured) multilayer printed boards
SS 378 : 1996 Specification for low capacity WC flushing cisterns up to 4.5 L maximum
SS 379 : 1996 Specification for vitreous china WC pans for use with low capacity WC flushing cisterns up to 4.5 L maximum
REVISION
SS 196 : 1996 'Technical drawings - Method of indicating surface texture on drawings (Endorsement with amendment of ISO 1302 : 1992)
SS 209 : 1996 Specification for battery-operated emergency power supply for lighting, ventilation and alarm bell of lifts
SS 256 : 1996 Specification for float operated valves (excluding floats) - Diaphragm type (plastic body) for cold water services
SS 263 : Specification for luminaires Part 1 ; 1996 *General requirements and tests (Endorsement with amendment of IEC 598-1 1992)
SS 270 :1996 Specification for elastomeric seals for joints in pipeworks and pipelines
SS 291 :1996 Specification for conductors in insulated cables and cords
SS 358 : Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V
Part 3 : 1996 Non-sheathed cables for fixed wiring (Endorsement with amendments of IEC 227-3 : 1993) (Revision of SS IEC 227-3 : 1979)
Part 4 : 1996 Sheathed cables for fixed wiring (Endorsement with amendment of IEC 227-4 1993) (Revision of SS 227-4 : 1979)
SS ISO 2553 : 1992 'Welded, brazed and soldered joints - Symbolic representation on drawings (Revision of SS 200 : 1985)
SS ISO 3040 : 1990 *Technical drawings - Dimensioning and tolerancing cones (Revision of SS 258 : 1982)
SS IEC 227-1 : 1993 Polyvinly chloride insulated cables of rated voltages up to and including 450/750 V - General requirements (Revision of SS 358 : Part 1 : 1 99 1)
CP 31 : 1996 Code of practice for installation, operation, maintenance, performance and constructional requirements of mains failure standby generating systems
CP 60 : 1996 Code of practice for bunkering by bunker barges/ tankers
SS 88 : 1978 Specification for mineral solvents (white spirit and related hydrocarbon solvents) for paints and other purposes
SS 89 : 1981 Specification for extenders for paints
SS 92 : 1981 Specification for iron oxide pigments for paints
SS 141 : 1976 Specification for unplasticized PVC pipes for cold water services and industrial uses (Confirmation with amendment)
SS 272 : 1983 Specification for unplasticized PVC pipes ground for drainlines and sewers (Confirmation with amendment)
SS 310 ; 1986 Specification for concrete interlocking roofing tiles (Confirmation with amendment)
SS 358 :- Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V
Part 2 : 1991 Test methods (Confirmation with amendment and re-numbering of SS IEC 227-2 1979)
Part 5 : 1991 Flexible cables (cords) (Confirmation with amendment and re-numbering of SS IEC 227-5 : 1979)
CP 36 : 1987 Modular coordination for the building industry
SS IEC 227-6 : 1985 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Lift cables and cables for flexible connections
AMENDMENT
SS 75 : Part 2 : 1978 Specification for draw-off taps and stopvalves for water services (screw-down pattern), Part 2 : Draw-off taps and above-ground stopvalves (Amendment No. 1, February 1996)
SS 97 : Part I : 1994 Specification for residual current circuit breaker without integral overcurrent protection for household and similar uses, Part 1 : General rules (Amendment No. 2, February 1996)
SS 141 : 1976 Specification for unplasticized PVC pipes for cold water services and industrial uses (Amendment No 1, February 1996)
SS 272 - 1983 Specification for unplasticized PVC pipes below ground for drainlines and sewers (Amendment No. 1, February 1996)
SS 310 : 1986 Specification for concrete interlocking roofing tiles (Amendment No. 1, February 1996)
SS 358 : Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V
Part 5 : 1991 Flexible cables (cords) (Amendment No. 1, February 1996)
SS 360 : 1992 Specification for performance and construction of electric circulating fans and regulators (Amendment No. 2, February 1996)
SS IEC 227 - 2 : 1979 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Test methods (Amendment No. 1, February 1996)
WITHDRAWAL
SS 236 :1980 Specification for flexible cords
SS 282 : 1984 Specification for metal cutting bandsaw blades
SS 296: 1984 Specification for transistorised ballasts for tubular fluorescent lamps
|
|
|
|
|